Our Voltron adventures from Saturday of Holiday Matsuri are uploaded! It was a really amazing convention again this year and I really wanna do a review post at some point~ Check out the vlog in the meantime~
I just realized that I never shared my vlog from Sunday of MegaCon Tampa Bay on my blog! If you all like Voltron, this is definitely very Voltron heavy!! I went as Lance and it was a blast. The fandom for Voltron is just so sweet and overall such a fun community. Really looking forward to going back to MegaCon Tampa Bay again next year! The convention was super well laid out and organized. Props to the team who set this up and made it great! Especially for its very first year in Tampa!
Hey guys~! Wow, it’s been a while since I sat down and actually put a lot of time and effort into a post. Today I’m going to show yah’ll have to make Keith’s dagger from Voltron!
-Sanding Paper/Sanding Block
-Eva Foam/Silly Wink’s Foam
-1 Round Dowel
-Silver Metalic Spray Paint
-Flat Light Gray Spraypaint
1.) The first thing I did was take some foam board from the craft store and trace out the shape of the dagger, including the grip. I then cut out the shape with an exacto knife and then copied that onto another layer of foam board.
2.) After those pieces were glued together and completely dry, I beveled the edges of the craft foam using the exacto knife, cutting at an angle to make the edges pointy all the way around the blade portion of the knife. For obvious reasons, don’t bevel the grip of the knife!
3.) Modge Podge the entire knife. I did about 2-3 coats of modge podge. Once that is try, sand it down! If the dagger isn’t smooth, continue to add more layers.
4.) Spray paint the entire blade portion with silver metallic spray paint. Once dry, cut out a small rectangular piece of foam with a point about the shape and size of where you want to leave the silver and attach it to the dagger. Spray paint the flat gray color now. Your blade should end up looking like this now:
5.) Cut the edge of the grip down into a point and glue the round beveled piece to the edge. You can paint this piece now with black paint~
6.) Cut the leather pieces you have into long strips. Using gorilla glue, glue these pieces to the dagger making sure to cover the entire grip and part of the way up the blade. Use a sewing pin or clamp to hold the leather in place until it dies.
7.) Once your leather is dry, if it happens to be the wrong color, paint with acrylic paint. If the leather is shiny you have to sand it down first so make sure to get just plain leather. As with anything, painting it one flat color will make it look cartoony. To make it look more realistic, I recommend doing a few layers of a darker color then building upon it with a lighter shade of the same color.
8.) Cut out two pieces of Eva Foam the size and shape of the sheath, which should be about 3/4th’s the length of the dagger itself!
9.) Once you have these pieces, hot glue the edges together. Cut out a very very thin piece the width of the two sheets pressed together, and the length of all the way around the sheath on the edge. Glue this to the edge using hot glue~
10.) Modge podge the entire sheath using 3-4 coats to smooth the edges of the foam that was glued to the sides out a bit. Let dry. Spray paint with silver metallic spray paint all the way around.
11.) Using brown acrylic paint, paint in the brown portions of the sheath. Use several shades of brown to create more depth. Dark around the edges of where the leather should be, lighter towards the middle. Use an ink pen to outline the edges and make the silver portions have a sharper line, giving the illusion of depth.
12.) Using dry brown paint, brush the edges of the silver metallic spray paint on the sheath. After a few seconds, take a damp tissue and wipe some of it away, giving the silver more of a tarnished appearance.
And that’s how I made my Keith Dagger from Voltron for a friend~ Have fun guys~ Hope this tutorial helped! In the future expect more prop tutorials with more step-by-step photos than what I had here. I didn’t start taking photos early enough with this one. I’ll also try to be as informative as possible~!
Hey guys! You might have noticed that I haven’t been posting quite as regularly on the blog and if I do post, it’s typically to share my videos on my Youtube Channel. That’s because I mostly want to focus on tutorials and also skits and parodies over on my channel and that takes a lot of my time now-a-days. My reviews of games and movies have also stopped, mostly because I was forcing myself to do them versus doing it out of the love to review. SO, what does that mean for the blog?
Well, the good news is that I’ve had some time to think of what I can do with the blog. And nothing will really change? The blog will still primarily focus on cosplay. But instead of doing tutorials in written format when I’ve already done a video explaining, I’ll be placing prop tutorials here. This is essentially because, prop vids are hard to film and also tend to bore people in video format or just be overly complicated to explain. So, here I’ll be detailing my steps in making props using photographs and detailed explanations. Hopefully that should be very informative and make some things easier for yah’ll! I’ll still be posting my videos semi-regularly but interspersed with the blogs so that it’s not a wall of spam of videos any longer.
My first prop that I’ll be showing how to make will be Star Butterfly’s phone~ So get ready for that! =D
This year I had the pleasure of attending Saturday and Sunday of ShadoCon, located in St. Petersburg, FL. This convention is incredibly small, taking place inside of a Hilton near Bayshore but it was incredibly fun. It had a lot of opportunities for photos with photographers and definitely was a very low-key convention. The panels also seemed pretty good as well. The cost might have been kinda high for a convention this small but ultimately I think the fun was worth it. Also, you could probably easily attend in the hallways without having a con pass and get the majority of the main experience, lol! Especially because the majority of the artisans are outside of the vendors room anyhow. I went as Judy Hopps from Zootopia on Sat, but didn’t get much footage. Sunday, however, I attended as Blood Moon Ball Marco with my friend NekoUsagiTV as Blood Moon Ball Star. We had a blast together and the vlog is mostly footage of us goofying around.